Setting Up the Ethernet Router

This article will guide you through setting up your TP-Link Omada ER605 Ethernet router, which needs to be connected to your cable modem, door controller, and Insight Access computer.


DISCLAIMER-The router included with your door setup is the only router that is supported by Gym Insight for warranty and support services.   Using a non-supported router will void your warranty.


1. Connect the included router power supply to the router. The power light will stay illuminated.

2. Connect the Category 5 cable running from the cable modem into port 1, WAN.

3. Connect the Category 5 cable from the door controller into any port 2 through 5, LAN.

4. Connect the Category 5 cable from the Insight Access computer to any port 2-5, LAN.

This concludes your router setup. Please see our articles on setting up Insight Access and connecting to the door controller.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Related Articles